Our Products
Brand: FESTOOL
MPN: FES492184
Festool Copying ring KR-D 27,0/OF 1400
Order number: FES492184
Model: KR-D 27,0/OF 1400 ....
N$ 822.25
Ex VAT:N$ 715.00
Brand: FESTOOL
MPN: FES494625
Festool Copying ring KR-D 30,0/OF 2200
Order number: FES494625
Model: KR-D 30,0/OF 2200 ....
N$ 773.38
Ex VAT:N$ 672.50
Brand: FESTOOL
MPN: FES492185
Festool Copying ring KR-D 30,0/OF 1400
Order number: FES492185
Model: KR-D 30,0/OF 1400 ....
N$ 822.25
Ex VAT:N$ 715.00
Brand: FESTOOL
MPN: FES492186
Festool Copying ring KR-D 40,0/OF 1400
Order number: FES492186
Model: KR-D 40,0/OF 1400 ....
N$ 822.25
Ex VAT:N$ 715.00
Brand: FESTOOL
MPN: FES492179
Festool Copying ring KR-D 8,5/OF 1400
Order number: FES492179
Model: KR-D 8,5/OF 1400 ....
N$ 822.25
Ex VAT:N$ 715.00
Brand: FESTOOL
MPN: FES486534
Festool Copier scanning set KT-OF
Order number: FES486534
Model: KT-OF ....
N$ 3,363.18
Ex VAT:N$ 2,924.50
Brand: TORK CRAFT
MPN: TCCS0355-SK04
Tork Craft Carbon Brushes (45) For TCCS0355
At a Glance: Replacement carbon brush set (part 45) designed for the Tork Craft TCCS0355 cut-off saw
Carbon brushes are the quiet little workhorses inside your motor — and when they wear down, the tool starts acting weird: power drops, arcing increases, and the motor may cut in and out (or refuse to start at all). The Tork Craft TCCS0355-SK04 Carbon Brushes are the correct replacement set for the TCCS0355 cut-off saw, restoring solid electrical c..
N$ 49.22
Ex VAT:N$ 42.80
Brand: TORK CRAFT
MPN: TCCS0355-SK08
Tork Craft Cord & Clamp Kit (53/77/83/84) For TCCS0355
At a Glance: Replacement cord and clamp/strain relief kit (parts 53, 77, 83 and 84) for the Tork Craft TCCS0355 cut-off saw
A cut-off saw draws serious power, which means the power cord and its strain relief take real abuse—dragged across floors, snagged around benches, and flexed thousands of times. When the cord is nicked, loose, or the clamp is cracked, you’re not just dealing with inconvenience; you’re dealing with a safety risk. T..
N$ 270.25
Ex VAT:N$ 235.00
Brand: TORK CRAFT
MPN: TCMD0035-SK13
Tork Craft Brush Holder (40, 42-44) Motor Service Kit (TCMD0035-SK12)
At a Glance: Replacement brush holder components for motor assembly reference parts (40, 42–44) on TCMD0035 series mag base drills.
Carbon brushes can only do their job properly if they’re held square, guided smoothly, and kept under consistent spring pressure. If the brush holder is cracked, worn, heat-damaged, or contaminated with carbon dust and grime, you can end up with erratic brush contact, heavy sparking, and fru..
N$ 114.77
Ex VAT:N$ 99.80
